The short answer: MPLS is a private network from one carrier with predictable performance and a strong SLA, but it is costly per Mbps and slow to change. SD-WAN is a software layer that combines several links, such as leased lines, broadband and 4G or 5G, and sends each application over the best one, with direct access to cloud services. Most multi-branch businesses in India now use SD-WAN, or SD-WAN alongside MPLS for their most critical sites.
Key takeaways
- MPLS is a private, predictable network from one carrier, but costly per Mbps and slow to change.
- SD-WAN combines leased lines, broadband and 4G/5G and sends each app over the best link.
- With SaaS and cloud apps, SD-WAN avoids sending branch traffic through head office.
- Local internet breakout means every branch needs firewall protection; plan security with the network.
When every application ran in the head office data centre, connecting branches with a private MPLS network made sense. Today email is in Microsoft 365, the CRM is a SaaS app and files sit in the cloud. Sending all of that traffic back to head office first, then out to the internet, is slow and expensive. That shift is why SD-WAN exists.
How each one works
MPLS
Multiprotocol Label Switching is a private WAN service from a telecom carrier. Each branch gets a circuit into the carrier’s private network, and traffic between your sites never crosses the public internet. The carrier engineers the paths and commits to latency, jitter and uptime targets.
SD-WAN
Software-Defined WAN places an appliance or virtual device at each site and manages them all from a central console. Each site can use any mix of links. The SD-WAN measures every link continuously and sends each application down the best path: voice on the link with the lowest jitter, backups on the cheapest, Microsoft 365 straight to the internet. Traffic between sites travels in encrypted tunnels.
How a branch reaches Microsoft 365
With MPLS
- Branch office
- MPLS to head officePrivate circuit
- Head office firewallExtra hop and delay
- Internet and cloud apps
With SD-WAN
- Branch office
- SD-WAN devicePicks the best link per app
- Leased line, broadband or 4G/5GAutomatic failover
- Cloud apps directly
Side-by-side comparison
| Compared on | MPLS | SD-WAN |
|---|---|---|
| Transport | One carrier’s private network | Any mix: ILL, broadband, 4G/5G, even MPLS |
| Performance | Predictable, carrier-engineered | Depends on the links; smart routing hides most problems |
| Cloud and SaaS access | Usually through head office | Direct from each branch |
| Cost per Mbps | High | Lower, since it can use internet links |
| Adding a branch | Weeks, needs carrier provisioning | Days, with zero-touch device setup |
| Visibility | Limited, from the carrier | Per-application dashboards |
| Resilience | Single carrier unless you pay for a second circuit | Built-in failover between links |
| Security | Private, but not encrypted by default | Encrypted tunnels; often bundled with firewall features |
When MPLS still makes sense
- Real-time applications that cannot tolerate any variation, such as some trading, manufacturing control or legacy voice systems.
- Regulatory or customer contracts that specify a private network.
- A small number of large sites where existing MPLS contracts still have time to run.
In these cases a hybrid design works well: keep MPLS at the critical sites, add an internet link, and let SD-WAN manage both.
When SD-WAN is the better choice
- Many small branches, stores or warehouses across cities.
- Most applications are in the cloud or SaaS.
- Branches open, close or move often.
- You want 4G or 5G backup so that a fibre cut does not stop billing at a store.
- Your IT team is small and needs to manage everything from one screen.
Security: the part that changes most
With MPLS, branches usually reach the internet through one well-protected head office firewall. With SD-WAN, each branch can break out to the internet locally, which means each branch now needs protection. Most SD-WAN platforms include a firewall, and many connect to a cloud security service. This combination is often called SASE, Secure Access Service Edge. Plan the security design together with the network, not afterwards.
Central logging also becomes important. CERT-In expects logs from all ICT systems to be kept for 180 days, and SD-WAN devices at every branch are part of that. See our CERT-In guide.
Planning a migration
- Map your applications and where they live: data centre, Azure or another cloud, or SaaS.
- Audit every site’s links, contract end dates and actual usage.
- Pick two pilot sites, one easy and one difficult, and run SD-WAN alongside the existing network.
- Choose the underlay: a leased line plus broadband or 4G/5G is a common pattern for branches.
- Roll out in waves, and retire MPLS circuits as their contracts end.
How Enterprise Solutions can help
Enterprise Solutions is a corporate solutions provider based in Noida, working with businesses across Delhi NCR and India. If this article raised questions about your own setup, these are the teams to talk to:
- Network & Connectivity: Secure internet, software-defined networking, cloud connectivity, and managed wireless services.
Send us an enquiry or call +91 97185 59908 and our team will get back to you.
Frequently asked questions
What is the main difference between SD-WAN and MPLS?
MPLS is a private network from a single carrier with engineered, predictable performance. SD-WAN is a software layer that combines several links, including internet links, and routes each application over the best one.
Is SD-WAN cheaper than MPLS?
Usually yes per Mbps, because SD-WAN can use leased lines, broadband and 4G or 5G instead of only private circuits. Total cost depends on the devices, licences and security services you add.
Can SD-WAN and MPLS be used together?
Yes. A hybrid design keeps MPLS at critical sites and adds internet links, with SD-WAN choosing the best path for each application and failing over automatically.
Is SD-WAN secure?
SD-WAN encrypts traffic between sites, but branches that reach the internet directly need firewall protection at each site. Many SD-WAN platforms include it or connect to a cloud security service.
How long does an SD-WAN rollout take?
A pilot at two sites can run within weeks. A full rollout depends on the number of branches and the time needed to deliver new links, and is often done in waves.
Keep reading
Sources
This article is general information, not legal or regulatory advice. Rules and figures are as published on the date shown, and may change. Please confirm your organisation’s obligations with a qualified professional.
